The STM32F103C8T6 is a 32-bit microcontroller from the STM32 F1 series, manufactured by STMicroelectronics. It is notable for its ARM Cortex-M3 core, which operates at a frequency of 72 MHz.

ShenZhen TF Electronic Components Co.,Ltd

Website: https://www.tf-elec.com/…/st-ic-mcu-32bit-64kb-flash…/

Email: [email protected]

Skype: [email protected]

Here are the key specifications and features of this Microcontroller IC STM32F103C8T6 :

Key Specifications

• Core Architecture: ARM Cortex-M3
• Core Size: 32-bit
• Maximum Clock Rate: 72 MHz
• Flash Memory: 64 KB
• SRAM: 20 KB
• Package Type: LQFP-48 (48 pins)
• ADC Resolution: 12-bit with 10 channels
• I/O Ports: 37 programmable I/O pins
• Communication Interfaces:
• CAN
• I2C (2 channels)
• SPI (3 channels)
• USART (3 channels)
• USB
• Operating Voltage:
• Normal: 3.3 V
• Minimum: 2 V
• Maximum: 3.6 V
• Operating Temperature Range: -40 °C to +85 °C

Features

• The STM32F103C8T6 is compliant with both RoHS and REACH, ensuring it meets environmental standards.
• STM32F103C8T6 includes multiple timers (three general-purpose and one PWM timer) and two 12-bit ADCs, enhancing its functionality for various applications.
• The Microcontroller IC STM32F103C8T6 supports a wide range of connectivity options, making it suitable for embedded systems that require versatile communication capabilities.

This microcontroller STM32F103C8T6 is widely used in various applications, including industrial control systems, consumer electronics, and IoT devices due to its balance of performance and power efficiency.

The STM32F103C8T6 is a microcontroller unit (MCU) from STMicroelectronics, part of the STM32 family based on the ARM Cortex-M3 core. Here are some key features of the STM32F103C8T6:

1. Core: ARM Cortex-M3 32-bit processor.
2. Flash Memory: 64 KB of Flash memory for program storage.
3. RAM: 20 KB of SRAM.
4. Operating Frequency: Up to 72 MHz clock speed.
5. GPIO: Up to 37 I/O ports, configurable for different functions.
6. Peripheral Interfaces:
   • USART (Universal Synchronous/Asynchronous Receiver-Transmitter).
   • I2C (Inter-Integrated Circuit).
   • SPI (Serial Peripheral Interface).
   • USB 2.0 Full Speed support.
7. Timers: Multiple timers including general purpose and advanced-control timers for PWM generation.
8. ADC: 12-bit Analog to Digital Converter with up to 10 channels.
9. Operating Voltage: Typically 2.0V to 3.6V.
10. Package: 48-pin LQFP (Low-profile Quad Flat Package).
11.  

    

12. Applications

    The STM32F103C8T6 is widely used in various applications, including but not limited to:

    • Industrial control systems.
    • Consumer electronics.
    • Robotics.
    • Embedded systems.

    Development

    For development, various IDEs and toolchains can be used, such as:

    • STM32CubeIDE (ST’s official IDE).
    • Keil MDK.
    • IAR Embedded Workbench.
    • Atmel Studio with appropriate support.
    •  

      

      #ic #icchips #icstocks #integratedcircuit #integratedcircuits #electroniccomponents #pcb #pcba #diode #sensor #PLCC #CHIPS #microchip #TFELEC #icchip #circuitboards #resistor #capacitor #inductor #texasinstruments #transistor #tfelectroniccomponents #tfcomponents #iccomponents #icchipssuppliers #icsuppliers #ICs #Switches #bottons #PCBAssembly #PCBA #PCBBOARD #PCBManufacturer #ElectronicComponents #arduino #arduinoproject
    •